Yakoo 555 multifuctional filler is a high quality Body Filler formulated with a specific polyester resin. It is designed for panel beaters to perform quick fix of dents, holes, and scratches of auto bodies. It dries quickly. Sanding is quick and easy. After mixing with supplied harder and application onto the body, it forms a very strong adhesive strength with any Galvanized Panel, Aluminium Panel, Steel Panel, Iron Panel, Seam Welding, Fiberglass or Epoxy Primer. It sticks to the body very securely. Just use P80 or P120 for the first sanding, than apply P180 or P240 for final sanding. Don’t left there too longer for sanding. The longer, hardener cures deeper, sanding will get harder. Yakoo 555 is one of the most reliable and economic filler on the market.

Main Characteristics:

•             Creamy polyester filler

•             Easy to apply

•             Easy to sand

•             Pinhole free performance.

•             Strong adhesive strength with applied substrates.

Applicable Substrates:     Galvanized Panel, Aluminium Panel, Steel Panel, Iron Panel, Seam Welding, Fiberglass, Epoxy Primer.

•             Mixing Ratio:            Putty : Hardener = 100 : 1.5-2.5 (by weight)

•             Pot Life:                   3-5 min (depends on mixing ratio and temperature)

•             Sanding:                   10-30 min (depends on room temperature)

Application Procedure:

•             Substrate preparation: degrease, dry sand with P80-P120.

•             Mixing: the filler should be mixed with the supplied hardener in 100:1.5-2.5 weight ratio. Mix well until uniform colour appears.

•             Application: Apply the mixed putty on the prepared surface within 3-5 min (25°C). 

•             Sanding: allow 10-30 min (at 25°C) after applying before sanding.